- Good adhesion and compatibility with paints
- Easy application with TEROSON tubular bag gun
- Stress-free bonding of TEROSON FO 1 / 50 sealing strips to the building shell
-
Good adhesion and compatibility with paints
-
Easy application with TEROSON tubular bag gun
-
Stress-free bonding of TEROSON FO 1 / 50 sealing strips to the building shell
-
EMICODE EC 1 Plus certified
TEROSON® AD SP - water-based special polymer for bonding plasterable sealing strips in the areas of facade & window installation. For bonding sealing strips to the building shell, e.g. TEROSON FO 1 SK and FO 50 SK.
Clean the substrate before applying the adhesive. The surfaces to be bonded must be load-bearing, sound and free of dust, oil, grease, release agents, sintered layers or other substances likely to impair adhesion.
Apply the adhesive paste in strands to the building shell using either a manual or a compressed air gun (air pressure 2 to 5 bars). Afterwards, press the sealing strip into the still fresh but skin-free adhesive paste. Finally, roll it down with a TEROSON hard rubber roller.
Immediately remove excess adhesive or stains with a cloth. After curing, the adhesive can only be removed mechanically.
No, however, the product can be processed up to +5 °C. At lower temperatures down to -5 °C, our AD KDS is used.
Yes, the product is very low in emissions and has the EMICODE EC1 plus certificate.
No, the product is only available in the color white and in a 600 ml tubular bag.