- Equipped with one 25 mm self-adhesive strip
- Vapor-permeable (sd value: < 1 m)
- Easy application
-
Equipped with one 25 mm self-adhesive strip
-
Vapor-permeable (sd value: < 1 m)
-
Easy application
-
Can be applied all year round down to -5 °C
-
High heat resistance and strong adhesion
-
Adheres even to wet frames
The new TEROSON® FO 2 SK 1 vapour-permeable facade film with PSA-Hybrid technology sets a new benchmark. The solution for the systematic, waterproof, but highly permeable connection seal in the outdoor area – especially of facade elements, windows, attics and lower window connections. In terms of building physics, it is convincing in all aspects. It is more tear-resistant and much more sticky than before and ensures for decades the safety of building envelopes.
Clean the substrate before fixing the sealing strip. The areas to be sealed must be load-bearing, sound and free from dust, release agents, oil, grease, sintered layers and other substances that may impair adhesion. All metal substrates, e.g. element surfaces of aluminium or zinc, must be free of oxide layers and release agents.
On mineral, weakly bound but load-bearing substrates it is recommended to apply a TEROSON primer. At low temperatures and damp substrates, TEROSON PR PRIMER M+S is well suited for this purpose.
After removing the 30 mm wide release film, the sealing strip can be fixed cleanly and efficiently to the profile / building substrate. Press the sealing strip firmly down with a TEROSON hard rubber roller so that it cannot slip when the next steps are carried out. The SK 1 version is bonded to the building structure using TEROSON AD KDS adhesive paste.
We recommend a TEROSON primer for mineral, weakly bound but stable substrates. In adverse weather conditions, it is always necessary to use an adhesion promoter on mineral substrates.
The adhesive width for the frame profile is 20-30mm, this is already specified by the self-adhesive strip of the respective sealing foil. The adhesive width varies from 30-50 mm depending on the structure of the product, the current technical data sheet for the product is decisive. Note: Depending on the project, the adhesive width can be increased on smooth, clean and stable substrates after consultation with the TEROSON facade expert. Also can be lower.
Overlapping film joints are glued on top of each other with a width of approx. 50 mm. An additional mechanical fastening of the TEROSON sealing foils is generally not required.