-
High initial tack
-
Suitable for indoor & outdoor
-
Gap-bridging ability
-
Resistant to weathering and ageing
-
Can be painted over and sanded
TEROSON® AD MS 2100 - Special assembly adhesive featuring very fast curing. Extremely strong bonding solution based on MS polymers.
The surfaces to be bonded must be clean, dry and free of grease. In the production of metals, release agents are often used. These must be removed with TEROSON Adhesion-Promoting Cleaner (also part of the sealing system). The pre-treated surfaces, e.g., surfaces coated with textured paint, can afterwards be bonded with TEROSON AD 2100 MS adhesive.
Apply the adhesive in strands (recommended diameter 6-8 mm, distance between the strands approx. 10 cm) to the workpiece or substrate (depending on the expected load of the bond). When bonding on vapor-impermeable substrates like glass, metal or GRP, the strands must be interrupted by 10 cm every 50 cm to avoid trapping condensate.
Immediately remove excess adhesive with a cloth. After curing, the adhesive can only be removed mechanically.
The curing speed at +23 °C and 50 % RH is 4mm/24h.
Yes, the product is very low in emissions and has the EMICODE EC1 plus certificate.
In a cool and dry storage for 12 months.