-
Surface-strengthening effect
-
High yield
-
Rapid drying
-
Suitable for use on mineral and bituminous substrates
-
Can be applied down to -10 °C
TEROSON® PR PRIMER M+S is a specially developed adhesion promoter that forms a permanent bond with the substrate. It produces a load-bearing surface to ensure a durable bond with TEROSON sealing strips. Sealing strips plus primer form a system of perfectly matched components. On porous and mineral substrates, PR PRIMER M+S is used to produce a load-bearing surface.
Mineral substrates must be load-bearing, sound and free of oil, grease and release agents. The building substrate should be smooth and even. Before applying the primer, remove any impurities, sintered layers, concrete fins or ridges, mortar residues or loose parts.
TEROSON PR PRIMER M+S is applied by roller or paste brush on the mineral substrate. Substrates with a high dust load must be cleaned before applying the primer, e.g. with a scrubbing brush, hand brush or vacuum cleaner. TEROSON PR PRIMER M+S can also be used on damp substrates (construction moisture). After application, allow the primer to flash off for approx. 20-50 minutes, depending on temperature, substrate and air humidity.
Only fresh, uncured primer stains can be removed with ethanol. After curing, excess primer can only be removed mechanically or with special cleaning agents.
Yes, the product can even be processed down to -10 °C and on damp substrates.
Depending on the absorbency of the substrate, the consumption is between 90-120 g/m².
In a cool and dry storage for 12 months.